If you’re like most sewers, you probably have a brother LS 2125 sewing machine that you’ve been using for years. But if you’re like most sewers, you probably don’t know how to thread it.
Here’s a guide to help:
How Do You Thread A Brother ls 2125 Sewing Machine ( Setup By Setup)
1. Open the top cover and remove the bobbin case. Find the white cord that goes from the motor to the bobbin case and unplug it.
2. Locate the white cord that goes from the bobbin case to the sewing machine. Unplug it.
3. Locate the feed dog control lever and unplug it.
4. Locate the small black cord on the right side of the machine that is unplugged.
5. Now that you’ve unplugged all the cords, find the manual threader on the right side of the machine. Thread it through both the front and back of your sewing machine and pull it tight.
6. Once you’ve threaded the manual threader, turn your sewing machine on and look at the bobbin case. You will see that it has two white cords coming out of it.
7. The white cords are the ones you unplug. This will allow your sewing machine to work properly.
8. Once you’ve done that, put the bobbin case back on your sewing machine and test it out. It should work fine now.
How do you spool a brother LS 2125?
When you are done sewing, always take a moment to cut the thread. If you don’t, it will tangle and knot up, which will make it difficult to sew properly the next time.
To cut the thread, hold onto the fabric with one hand and use the other hand to cut the thread close to the fabric. It’s also a good idea to keep some scissors nearby so you can quickly snip any loose threads that may have formed.
Now let’s learn how to spool a brother LS 2125. This process is important in order to keep your machine running smoothly. First, make sure your machine is unplugged.
Then locate the spool pin on the top of your machine and place the spool of thread on top of it so that the thread hangs down over the edge.
How do you wind a bobbin on a Brother LS 2125?
There are a few ways to wind a bobbin on a Brother LS 2125. One way is to hold the bobbin in your left hand and the thread in your right hand. Put the end of the thread in the hole at the top of the bobbin, and wrap it around the grooves clockwise until it looks like there’s enough on there.
Hold onto both ends of the thread, and place the bobbin on the machine so that the spindle goes through the hole. Push down on the pedal to start sewing, and let go of one end of the thread when you need to change bobbins.
Another way is to put some tension on the thread before you start winding it around the bobbin.
How do you change the stitch length on a Brother LS 2125?
Changing the stitch length on a Brother LS 2125 is very easy. First, make sure that the machine is turned off and unplugged. Next, open up the cover of the machine. There are two buttons on either side of the needle that control the stitch length.
To change the length, use your thumb to push the button on the side of the needle that you want to lengthen or shorten the stitches. You can also use your index finger to hold down both buttons at once to quickly change between stitch lengths.
Finally, close up the cover of the machine and plug it back in. The machine will be set to your new stitch length when you turn it on.
Conclusion
In conclusion, threading the Brother LS 2125 sewing machine is a fairly simple process once you understand the basics. By following the steps outlined in this article, you should be able to have your machine threaded and ready to sew in no time.